LOCTITE® AA H8100 Green, 2-Part, Non-Sag, Room Temperature Curing Methacrylate Acrylic Adhesive
Need Datasheets?
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)LOCTITE® AA H8100 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive designed to have fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It provides high elongation and excellent cold temperature impact strength and forms resilient bonds. It maintains its strength over a wide range of temperatures.
Features:
- Non-sag
- Offers excellent tolerance to off-ratio mixing
- Little or no surface preparation
- Provides high elongation and excellent cold temperature impact strength
Technical Specifications:
| Product category: | Structural adhesives |
| Technologies: | 2-component methyl methacrylates |
| Cure type: | Room temperature (ambient) cure |
| Hardener: Color: | Blue |
| Hardener: Specific gravity, @ 25.0 °C: | 1.1 |
| Key characteristics: |
Cure speed: rapid cure Elongation: high elongation Environmental resistance Sag: non-sag Temperature resistant |
| Mix ratio, by volume: | 10 : 1 |
| Mixed: Color: | Green |
| Mixed: Fixture time, Mild Steel (grit blasted): | 15.0 sec. - 20.0 sec. |
| Mixed: Specific gravity, @ 25.0 °C: | 0.97 |
| Number of components: | 2 part |
| Recommended for use with: |
Acrylonitrile butadiene styrene (ABS) Fiberglass reinforced plastic (FRP) Gel coat Metal: aluminum, steel, steel - stainless steel |
| Resin: Color: | Yellow |
| Resin: Specific gravity, @ 25.0 °C: | 0.95 |
Additional Information:
The 50ml Cartridges are 10:1 ratio, and are designed to work best with a 50ml cartridge Dispenser with a 10:1 ratio plunger. We strongly advise you use a 50ml Dispenser WITH a 10:1 ratio plunger for this cartridges. If you do not have one, please check out our 10:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, then we recommend considering one of our 50ml Kits that include a variety of different accessories that you may need for fast small jobs.
The 490ml Cartridges are 10:1 ratio, and are designed to work best with a 490ml cartridge Dispenser with a 10:1 ratio plunger. We strongly advise you use a 490ml Dispenser WITH a 10:1 ratio plunger for this cartridges. If you do not have one, please check out our 10:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.