Permabond TA4611 Polyolefin & Rubber Bonder Thin Viscosity 10-16 min Acrylic MMA Adhesive Off-White
Regular price
$50.00 CAD
13 units available
Need Datasheets?
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)Permabond TA4611 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene - with no primer or expensive surface treatment required. It can also be used to bond a wide variety of other materials such as metals and composite materials and ideal for bonding dissimilar surfaces.
TA4611 is a substitute / backup formula for these formulas:
- 3M DP8005
- 3M DP8010
- Scigrip SG400 LSE
Features and Benefits:
- Adhesion to a wide variety of substrates
- Lower viscosity / flowable formula
- Full cure at room temperature
- Set time is 10-16 min
- Bonds to polyolefins
- No primer required
- No need to flame-treat or plasma treat-surfaces before bonding
- Excellent impact & sheer strength
- Excellent chemical resistance
Ideal Surfaces / Works With:
- Most Metals (Mild Steel, Stainless Steel, Aluminum, etc)
- Most Plastics & In particular the hard-to-bond Low-Energy Plastics
- Composites
- Carbon Fiber
- FRP (fiber reinforced plastics)
- GRP (glass reinforced plastics)
- ABS,
- Polycarbonate
- PVC
- PA6
- PET-G
- PE-P
- EPDM & Rubbers
- E- Coatings
- Polypropylenes (PPCO, PPHO, and related)
- Polyethlyenes (LLDPE, LDPE, MDPE, HDPE, UHMW, etc)
- PTFE / Nylon
Physical Properties Of Uncured Adhesive
| TA4611 A | TA4611 B | |
| Chemical Composition | Methacrylate | Methacrylate |
| Color | Translucent | Translucent |
| Mixed Color | Translucent | Yellow |
| Viscosity @ 25° C | 20,000-30,000 mPa.S (cP) | 10,000-15,000 mPa.S (cP) |
| Specific Gravity | 1.0 | 1.0 |